In this article, we’ll show you how to disassemble this cleaner head and wash the two rollers.

Then gently rinse the pre-motor filters with cold water, before repeating with the post-motor filter.. You won’t be able to remove all the staining and you shouldn’t scrub the filter – the goal is to get rid of dirt and other debris that could block airflow.Discolouring is completely normal for a vacuum filter.. Be extra careful when cleaning felt filters, as these are delicate.

You should never use soap when cleaning any of a Shark vacuum’s filters, as this could affect the filtration..Step 4: Allow the Filters to Fully Dry for At Least 24 Hours.You shouldn’t put the filters back inside the vacuum until they are fully dry.

Damp filters are the perfect environment for mould to grow, especially when sealed inside the vacuum cleaner.Any moisture will also cause dust and dirt to stick to the filter, ruining your hard work..

It typically takes around 24 hours for a vacuum filter to air dry.

HEPA filters may take longer, so make sure these are fully dry before replacing them.. Once dry, replace the filters before vacuuming.There is a button you can use to completely detach the canister to give it a clean.

Make sure to only use a damp cloth and allow the bin to completely dry before reattaching.. Close the bin trap door then push the bin upwards until it clicks back into place.. How to Empty the Dyson Omni Glide.The Dyson Omni Glide is the company’s first dedicated hard floor vacuum.

Here’s how to empty it:.Make sure the vacuum is switched off.