Step 4: Clean the Dust Canister or Replace the Bag.

When you wash the filter with water, it’s vital that you allow at least 24 hours for it to fully dry before re-inserting it in the filter housing..If you replace the filter before it’s dry, the housing becomes the perfect environment for mould to grow.

There’s also a risk of water entering the vacuum’s motor, which can cause permanent damage..You can also wash the filter housing with warm water.Don’t use hot water, a dishwasher, or cleaning products for any components of the Shark WV200UK though.. 5.

Replace The Filter.The final step is to reinsert the filter back into the filter housing, so that the metal handle is still visible.

You can then slide the filter back into its proper position.. Congratulations, you’ve just cleaned your Shark WV200UK’s filter!

It’s now ready to use again – hopefully with its suction strength and performance restored to normal..The good news is that it’s easy to remove the Vax Blade 4’s brush bar for cleaning.

Here’s a guide to doing just that – and it only takes a few minutes!.This method should also work for the Vax Blade 2 and 3.

You can use a similar method for the.Vax Blade Pro 32V.