Kirby is a US-based vacuum cleaner manufacturer.

A vacuum’s drive belt can spin 100,000 per minute – or more!Considering these high speeds, it’s not surprising that belts are often broken or stretched.. 3.

Check for a Broken Brush.It’s possible that the brush roll itself is damaged, which can stop it from turning correctly.This is much less common than a broken belt, but is something to check for if you’re sure that the belt is working correctly.. Again, switch off and unplug the vacuum, before turning it over so you can see the brush.

Take a look for any signs of cracks or other damage to the brush.You can also spin it manually to inspect the brush from different angles..

If the brush is damaged, then you’ll need to replace it.

This is a simple task on most vacuums, although you’ll need to find the correct brush for your make and model.. 4.Prep the area by removing clutter and vacuuming to remove loose dirt and debris.

If you skip this step, there’s a risk of pushing dirt particles deeper into the carpet fibres..Mix your cleaning solution by adding 1 teaspoon of washing-up liquid with 100ml of water.

Pour it into a spray bottle.. Spray the solution onto the stain until it’s relatively damp but not saturated.Leave it for a few minutes to work into the stain.. For a fresh spill, blot with a white cloth.