Start from the outside and work inwards to prevent the stain from spreading further.

, although you should check for any differences in the manual instructions.. What You’ll Need.Coin to unlock the brush bar.

Do not use water, a wet cloth, or any cleaning products for the process below..Step 1: Remove The Floorhead.Before you start trying to clean the Vax Blade 4 brush bar, it’s best to remove the floorhead from the machine.

You can do this by pressing the blue button at the bottom of the wand..There are two reasons for this:.

It’s much easier to work with the floorhead when it’s not attached to the main vacuum..

Removing the floorhead means there’s no chance of accidentally switching the vacuum on while cleaning the brush, which could cause injury..Sometimes the Multi Mk2’s bin is a bit stiff, due to it not having a latch system..

Step 2: Take the Gtech Bin to an Outdoor Bin.You can technically empty the Gtech Multi Mk2 into any bin.

recommend emptying a bagless vacuum cleaner into an outdoor bin (if possible)..The reason is simple: there’s nothing stopping a cloud of dust, pet dander, and other allergens escaping into the air when you empty a bagless vac..