If you’re not sure how to empty your Dyson, make sure to check the manual.

Most dirt, hair, and other debris should fall into the bin, but you may need to give it a gentle tap to remove anything that remains.. Shark also recommends tapping the filter screen to get rid of dirt and debris that might be stuck on it.The filter screen is the metallic sheet that’s located on the opposite side of the bin to the hinge.. 3.

(Optional) Wipe The Dust Bristle.The Shark’s WV200UK has dust bristles along one of the edges.If there’s visible dirt or dust on these bristles, you can use a dry cloth to clean them.. Don’t press too hard on the bristles when cleaning, however, as this could damage them..

Removing The Dust Cup For Cleaning.You can also fully remove the dust cup for cleaning.

You won’t need to do this every time you empty the vacuum, but it’s a good idea to clean the cup whenever there is visible dirt or dust..

Turn off the power, empty the vacuum, and leave the bin hinged downwards.. Slide forward the filter housing to remove it.. Press the orange release tab on the bin and simultaneously pull the cup away from the vacuum.. Handwash the vacuum bin with lukewarm water (do not use any detergents or cleaning products)..When you scale up an activated charcoal filter to the size of a Henry filter, it’s easy to see how a large amount of odorous material can be removed from the air before the filter needs to be replaced..

Does The MicroFresh Filter Really Reduce Odours?.Yes, we’ve found that MicroFresh filters do an excellent job of removing bad odours when you’re vacuuming..

The basic Henry filter isn’t terrible, but many pet owners notice that the vacuum starts to smell bad after a while.This is because the inside of the vacuum contains microscopic particles that escape into the air via the exhaust..